In the fluid transfer systems of chemical and other industries, the pumps and valves, as critical control components, are constantly exposed to demanding conditions, such as strong corrosion, high temperature and high pressure. FEP resin for pump valve lining can effectively prevent the equipment being corroded by chemical substances, significantly extend its service life, reduce maintenance costs and replacement frequency.
FEP is a copolymer of tetrafluoroethylene(TFE) and hexafluoropropylene(HFP). It has good melt flow ability and is usually processed by thermoplastic processing methods such as injection molding and extrusion.
High Temperature Resistance
Excellent Chemical Stability
Superior Electrical Insulation
Low Surface Energy and Coefficient of Friction
Weather Resistance and Aging Resistance
Flame Retardant and Safety Characteristics
Process-ability and Lining Integrity
Chemical, pharmaceutical, metallurgy, wastewater treatment, energy, semiconductor.
| No. | ITEM | UNIT | VALUE | TEST STANDARD |
|---|---|---|---|---|
| 1 | Appearance | Translucent particle | ||
| 2 | Melting Index (MFR) | g/10min | 0.8-2.0 | ASTM D2116 |
| 3 | Tensile strength ≥ | Mpa | 30 | ASTM D638 |
| 4 | Elongation ≥ | % | 320 | ASTM D638 |
| 5 | Relative Density | g/cm³ | 2.12-2.17 | ASTM D792 |
| 6 | Melting Point | ℃ | 260±10 | ASTM D3418 |
| 7 | Dielectric Constant(106Hz)≤ | / | 2.15 | ASTM D150 |
| 8 | Dissipation Factor(106Hz) ≤ | / | 7.0×10-4 | ASTM D150 |
| 9 | Heat Stress Cracking Resistance | Crackless |
With low melting index and heat stress cracking resistant properties, it is used for stress cracking resistant requiring and low or medium speed processing. Mainly for heat shrinkable tubes, pumps, valves, piping and lining, wire insulation layer.
100 meters northwest of Changiiafang Village Committee, Gaoging County, Zibo City, ShandongProvince
Copyright © 2025 by Zibo Uflon New Material Technology Co., Ltd. All Rights Reserveds
Privacy Policy
